Page 12
• If the camera location has a microphone, also attach the audio cable to an audio input connector on the
back of the DVR.
6. Attach the power extension cable to the cameras to the recommended power source to power them on.
7. Power on the DVR.
• Connect the power adapter to the DC12V power connector on the back of the DVR.
• Power on the monitor.
• Connect the power cable to the power adapter and to a standard 120 VAC outlet. When the DVR is
powering on, an initialization window will appear.
8. When the CHOOSE LANGUAGE window opens, use the mouse to open the dropdown list, select the
language you prefer to use, then click Next. NOTE: You can also change the language setting later through
the SETUP menus.
9. In the DAYLIGHT SAVING window, use the mouse to open the dropdown menus and select the DLS region,
date and time. When the correct date and time is shown, click Next. NOTE: The date and time setup in the
DVR is used to timestamp recorded video recordings. It is very important that this be set correctly if video
recordings are used as evidence.
10. When the main screen opens, you should see a video image from each camera. Use this image to refine the
manual settings of the camera. These settings include the camera direction, and may include focus, zoom,
and other settings.
11. Right click the mouse anywhere on the DVR screen then click SETUP, or press the SETUP button on the front
panel to access the SETUP menu.
Commentaires sur ces manuels