Black BLK-PTZ12X Guide d'installation télécharger pdf (Page 127)

User Manual

125

3.5.3 Auto Pan Programming

The network Speed Dome Camera supports four Auto Pan Paths. Please refer

to the instructions below to set an Auto Pan Path.

Auto Pan Setting

To setup an Auto Pan Path, please first select a path number from the drop-down

list. Then move the cursor to the live view pane, and move the camera to a

desired view as the Start Point of an Auto Pan Path. Click on the <Set> button of

the <Start Point>, and the current view will be automatically saved as the start

point of the Auto Pan Path.

NOTE: The room ratio of an Auto Pan’s Start Point will persist

throughout the whole path.

Enter the speed ratio into the Speed field; the speed ratio ranges from 0 (low) to

3 (fast). Then choose to run the Auto Pan Path in right/left direction from the

Direction drop-down list.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 164 165

Pas de commentaire

Black BLK-PTZ12X Guide d'installation Page 127